ASTRO-MED QLS-2000XE SERIES, Инструкция по эксплуатации и установке

Страница: 151 / 214

QLS-3000/2000 Xe Series 6-25
6 Advance the thermal transfer ribbon between the printhead and the
platen roller.
7 On standard printstations, advance the thermal transfer ribbon over the
thermal transfer ribbon guide spindle. On inverted printstations,
advance the thermal transfer ribbon around the outside of the station’s
two guide spindles.
8 On standard printstations, advance the thermal transfer ribbon beneath
and around the cardboard take-up core on the rewind mandrel. On
inverted printstations, advance the thermal transfer ribbon above and
around the take-up core.
9 Tape the thermal transfer ribbon to the core.
10 Close the printhead.
11 Repeat procedure for remaining printstations.
Adjustment of the ribbon tension may be required after loading thermal
transfer ribbon. If the thermal transfer ribbon is wrinkling or smudging,
adjust the tension to alleviate these conditions.