ASTRO-MED QLS-2000XE SERIES, Инструкция по эксплуатации и установке

Страница: 160 / 214

6-34 Troubleshooting
The appropriate heat setting will vary depending on the media and ribbons
being used as well as the print speed setting. As a general guideline, the
ribbon types listed below will function best in the following print intensity
ranges:
Wax 1 to 12
Wax/Resin 6 to 20
Resin 16 to 32
In general, lower-quality media that requires more heat to produce a
satisfactory image is less advantageous in terms of speed and performance
than higher-quality media that images easily and quickly at lower
temperatures. If you use media that requires more heat, it is recommended
that you set the print speed to a slower rate.
Note: Some thermal transfer ribbon (typically, Resin type) reacts differently,
actually printing lighter if too much heat is applied. This is a result of
overburning the ink. If this occurs, decreasing the heat will darken the
printed image.