Manual Weighing Controller A 810
Page
36
A.S.T. Angewandte SYSTEM-TECHNIK GmbH Dresden
A L I
B I
A c t
o F F A c t
o n A c t
3.1.5. Submenu “Alibi”
This submenu defines the settings for internal legal-for-trade memory. This memory is used for proof of
weighing. It is written to, when operator “prints” to this memory. The string is as follows:
<Consecutive Number><Date><Time><1><Gross><Tare><Net><Productcode><0>
3.1.5.1. Alibi memory activate
“Act”
This parameter activates the alibi as
ringmemory.
OFF: not active
ON: active
default setting: off
Notice
: Reading out a full memory takes
app. 30 minutes.
Print to Alibi memory is done via function
call “16” (7.2 at page 109).
3.1.5.2. Print request to Alibi
memory “RQ”
This parameter defines under which
condition the print to Alibi memory is done.
0: print at keypress; scale has to be in
stable condition otherwise keypress is
ignored
1: same as 0 but Gross weight has to be
at Zero before print to Alibi memory is
done.
2: print at keypress; print to Alibi memory
is done, when scale is stable.
Keypress is saved until print to Alibi
memory is done.
default setting: 2
3.1.5.3. Minimum Load “MN”
This parameter defines wether a print
to Alibi memory is done, when actual
weight is greater than Minimal Load
“ML”.
ON: print to Alibi memory when actual
weight is greater then Minimum Load
OFF: print always to Alibi memory
default setting: on
Refer to 3.1.1.8 “ML” at page 26.
ENT
TARE
TARE
R Q
0
/NET
GROSS
ENT
/NET
GROSS
0
FUNC
-1
+1
cursor
left
2
SHIFT
>
value
incr. decr.
cursor
right
/NET
GROSS
0
0
TARE
/NET
GROSS
ENT
TARE
M N
o F F M N
o n M N
/NET
GROSS
0
0
TARE
/NET
GROSS
ENT