Manual of Weighing Controller A 810
Page
10
A.S.T. Angewandte SYSTEM-TECHNIK GmbH Dresden
1.1.5. Rear Panel
AC Power Input Connector
AC input is labeled with the standard AC voltage of the country in
which
the
unit
was
purchased.
Available voltage is: 115 or 230 V AC
Confirm the correct voltage on your A810. AC frequency is 48 to 62 Hz
and voltage supply -15 to +10%
Control signal Input/
Refer to Page 12 - PIN- Assignment of Control Signal Input / Output
Connector
Output
Connector
Interface
Connector for RS232, TTY, RS485
Load cell connector
Refer to Page 11 – Loadcell Connector
Calibration
lock
1.2. Panel cut size
5
2
4
3
1