Associated Research HYPOTULTRA III 7620, Руководство по эксплуатации и обслуживанию

Страница: 95 / 148

87
8.9.6. IEEE 488.2 Common Commands
These commands are required by the IEEE-488.2 standard with the exception of *PSC, *PSC?.
Most of these commands are not available over the RS-232 bus except for the *IDN? command
which can be used to retrieve the instrument identification information, and the four status
reporting commands *ESR?, *ESE, *ESE? and *STB?
Command Name Description
*IDN? Identification Query Associated Research Inc., Model
Number, Serial Number, Firmware
Revision
*RST Reset Command Resets HYPOTULTRA III
*TST? Self-Test Query 00H=OK
01H=TEST EEPROM ERROR
*CLS Clear Status Command Clear Standard Event Status Register
Clear Service Request Register
*OPC Operation Complete Command When all selected pending
operations complete, ESR BIT0=1
*OPC? Operation Complete Query When all selected pending
operations complete, Output Queue=1
*WAI Wait-to-Continue Command
*PSC {1|0} Power-on Status Clear Command 1 = Power-on clear enable registers
0 = Power-on load previous enable
registers
*PSC? Power-on Status Clear Query
*ESR? Standard Event Status Register Query 0 - 255
*ESE < value > Standard Event Status Enable
Command
value = 0 - 255
*ESE? Standard Event Status Enable Query 0 - 255
*STB? Read Status Byte Query Read Status Byte
*SRE < value > Service Request Enable Command value = 0 - 255
*SRE? Service Request Enable Query 0 - 255
*IDN?
Read the instrument identification string. Company =Associated Research Inc.
*RST
Reset the instrument to original power on configuration. Does not clear Enable register for
Standard Summary Status or Standard Event Registers. Does not clear the output queue. Does
not clear the power-on-status-clear flag.
*TST?
Performs a self-test of the instrument data memory. Returns 0 if it is successful or 1 if the test
fails.