Associated Research HYPOTULTRA III 7620, Руководство по эксплуатации и обслуживанию, Страница: 42 / 148

34
4. Programming Instructions
4.1. Setup System (Refer to FIG.1).
1. From the Perform Test screen, press the “<more>” soft key. A second set of soft key
selections will now be displayed.
2. From the secondary soft keys, press the “System” soft key. The Setup System parameters
will now be displayed.
3. At the Setup System menu, you may scroll to all of the parameters by using the arrow keys.
4. If the printer card is installed, Scrolling to <more> will display the second page of System
Parameters that contain the printer functions.
From the Setup System selections, sixteen different Hardware and Software controls may be
accessed; PLC Remote, Single Step, Fail Stop, Alarm, Contrast, Lock, Mem Lock, GPIB
Address, Smart GFI, Results, Cal Alert, Cal Date, Cal Due, Alert, Date, and Time. Pressing the
EXIT key at any time will return you to the Perform Test screen.
P L C R e m o t e O N S m a r t G F I O N
S i n g l e S t e p O N R e s u l t s L A S T
^
F a i l S t o p O N C a l A l e r t O N
A l a r m 5
C a l D a t e X X / X X / X X
v
C o n t r a s t 5 C a l D u e X X / X X / X X
L o c k O N A l e r t X X / X X / X X
< >
M e m L o c k O N D a t e m d y X X / X X / X X
G P I B A d d r e s s 1 0
T i m e X X : X X A M
E d i t
Press the <more> softkey.
Press the System softkey.
FIG.1
A C W T o t a l S e t t i n g s M e m N a m e * *
M 5 0 - 8 _
P 9 9 9 . 9 s 1 0 . 0 0 m A R
M e m o r y
S t e p
E d i t
< m o r e >
A C W T o t a l S e t t i n g s
M 5 0 - 8 _
P 9 9 9 . 9 s 1 0 . 0 0 m A R
R e s u l t
S y s t e m