Associated Research HYPOTULTRA III 7620, Руководство по эксплуатации и обслуживанию

Страница: 47 / 148

39
When P/F is selected, it is not possible to directly see the results of the test. In order to review
the test results refer to section
4.2.3 Reviewing Test Results.
When Last is selected, the results of the last step performed will be displayed on the Perform
Tests screen. There will not be a change in appearance or special screen displayed in this mode.
Security
Creating a Password
The main reason for the creation of a password is to prevent unauthorized access of Lock
parameters in the system menu and unauthorized disabling of the Calibration Alert function.
Once a password has been created both the lock functions and the Calibration Alert Screen
disable will require the password to access.
Press and hold the top soft key while powering up the instrument, the Edit Password screen
should now be displayed. The display will appear as follows:
E D I T P A S S W O R D
N e w P a s s w o r d = X X X X X X
C o n f i r m P a s s w o r d = X X X X X X
S e t t h e P a s s w o r d t o 0 t o d i s a b l e .
You may now type in the new password using the numeric keypad, press the ENTER key to
accept the new password or press the EXIT key to escape. After you type in your new
password, you will be required to confirm your new password by typing it again into the
“Confirm Password” field. Press the ENTER key to confirm the new password or press the
EXIT key to escape.
If the Password is set to 0, the Lock and Mem Lock parameters may be accessed by simply
pressing the “Lock and Mem Lock” soft keys. If the password has been set to anything but 0, a
password entry pop-up screen will appear to access the Lock and Mem Lock parameters. The
Password default is preset to 0 at the factory.
Please refer to the Calibration Alert section of the manual for an explanation of how the
password affects the Calibration Alert Disable.
Forgotten Password
If you have forgotten your password, you may access all security functions by typing in the
number “7600” into the password field. The old password cannot be recovered. A new
password should be entered or enter “0” to disable the password.