ASO Safety Solutions DRICO slife 150 FU 12, Руководство по эксплуатации

Страница: 7 / 48

DRICO
slife
FU 12 Operating Manual
_______________________________________________________________________________________________________________________________________
DIN EN ISO 9001 status: 31.03.2017 / Rev. 01 page 7 of 48
2 Safety instructions
•
Carefully read the operating instructions before putting then the gate control system
into operation.
•
The installation and start-up of the control system may only be conducted by
specialised personnel that are familiar with the operating instructions and the
applicable regulations on job safety and accident prevention. The instructions in these
operating instructions must be followed and adhered to unconditionally.
• The operating instructions must always be available at the control system‘s
site of operation.
They must be thoroughly read and applied by every person who is tasked with the operation,
maintenance and repair of the control system.
•
The operators of the gate system or their representatives must be trained in the operation of
the system after the system is started.
•
Electrical work may only be completed by electricians.
•
Safety regulations for electrical engineering and from professional associations must be
followed.
•
The manufacturer and user of the system/machine on which the control system is used are
responsible for coordinating and adhering to all applicable safety regulations and rules under
their own responsibility.
•
The instructions in these operating instructions must be followed to guarantee function and
safety. Bodily injuries or property damage may arise as a result of disregard of the warning
instructions. The manufacturer is not liable for damages caused as a result of non-observance
of the instructions.
•
The control system does not contain any components that the user must service. Any warranty
or liability on the part of the manufacturer is forfeited in the event of unauthorized
modifications or repairs to the control system.
•
The drive system must absolutely be removed from the power supply prior to wiring work. It
must be ensured that the power supply remains interrupted during wiring work.
•
All impulse transmitters and control devices for the gate must be mounted within view of the
gate and at a safe distance from the gate‘s moveable parts. A minimum mounting height
of 1.5
meters must be adhered to.
•
It must be ensured that children cannot play with the gate control.
• Before the gate is moved it must be ensured that there are no people or objects in the gate‘s
hazard area.
•
All existing emergency command devices must be checked before starting the system.
•
Reaching into a running gate or moving parts is never permitted.
•
Possible crushing and shearing points on the gate system must be taken into consideration
and if necessary protected.
•
The control system guarantees functional safety, but not the safety of the entire system. Thus,
a safety review of the entire system in accordance with DIN EN 13241-
1 „doors and gates
-
product standard“ is necessary prior to use of the control system.
•
The system must be checked for correct function in suitable intervals by qualified persons for
the standard-conform design of the safety system in accordance with the standard DIN EN
12453 „Safety in use of power operated doors and gates“. The check must be documented in
a way that allows it to be traced at any time.
The gate control system is a frequency converter. There may still be dangerous
voltages after shutdown due to loaded capacities. Thus, a waiting time of 5 minutes for
the discharging of the capacities must be adhered to.
There is
danger to life
with respect to live working on the frequency converter circuit board!
Only type B AC/DC sensitive residual current circuit breakers may be used if the control
system is protected with a residual current circuit breaker.