M
ODULO
1
-
M
ONTAGGIO
R
UOTA
P
OSTERIORE
P
HASE
1
R
EAR
W
HEEL
A
SSEMBLY
200
8 – 2.0 – ITA - Eng Modulo 1 / Pag. 10
Mod
num
Istruzione – Instrucion
Foto - Picture
1.
42.
Per questa operazione è necessario l'utilizzo degli
occhiali protettivi: inserire il seger nell'apposita
cava del perno ruota adiacente al volano.
Verificare che tutti e tre i nasetti del seger sian o
alloggiati all'interno della cava. FOTO
Note: the following step must be done used
safety glasses.
Insert the seger in the predisposed way on the
wheel pin close to the flywheel. Verify that all
the three snug of the seger are placed correctly
in the predisposed way. PICTURE
1.
43.
Estrarre dal sacchetto X-034 il distanziale da
2mm ed inserirlo sul perno ruota dal lato volano.
FOTO
From bag X-034, extract the 2mm spacer and
insert it in the wheel pin, flywheel side. PICTURE
1.
44.
Inserire il guscio ruota sinistro (con corona
catena) ed inserirlo sul perno ruota lato volano.
FOTO.
Insert the left wheel shell (the one with the spur
gear) and insert it in the wheel pin, flywheel
side. PICTURE.