Array electronic 3750A, Руководство пользователя

Страница: 87 / 120

Ｃｈａｐｔｅｒ ＩＶ Ｌｏｃａｌ Ｏｐｅｒａｔｉｏｎ
83
ARRAY
then select Value option via TAB key; set the value to 200.00 via and keys or via the
knob; then select Time option via TAB key; set the value to 1.0000 via and keys or
via the knob;
Step 13: Press dynamic key to return to the list operation menu;
Step 14: Press dynamic key to start the current list operation program and it will stop
automatically when the operation is finished;
Step 15: During the list operation, press dynamic key to stop the ruing list operation.
The corresponding SCPI commands of the above procedures should be as follows:
LIST
：
NUMB 0
；
Call the sequence numbered 0
LIST
：
MEMO “Test0”
；
Name the sequence Test.
LIST
：
EDIT 0, CCL,1A,1S
LIST
：
EDIT 1, CCH,20A,1S
LIST
：
EDIT 2, CVH,10V,1S
LIST
：
EDIT 3, CRL,1R,1S
LIST
：
EDIT 4, CP,200W,1S
；
The above five commands are the sequence steps
LIST
：
COUN 10
；
Cyclic time
LIST
：
CHA OFF
；
Close the chained sequence of the list
LIST ON
；
Start the list operation
LIST OFF
；
Stop the list operation
4.8.2 Starting/Stopping the List
Example: Start the No. 0 sequence and stop the active list operation.
Step 1: Press dynamic key to enter into list operation mode at initial interface;
Step 2: Set the NO to 0 via the keypad or via the knob and press key to confirm (The recall
number should be the sequence number in EEPROM.);
Step 3: Press dynamic key to start the current list operation
Step 4: Press dynamic key to stop the list operation;