Array electronic 3750A, Руководство пользователя

Страница: 21 / 120

Chapter I General Introduction
ARRAY
16
Voltage Value
To display the current input terminal voltage;
Power Value To display the current power value;
Current Value
To display the current value
Mode
CVH indicates constant voltage high range;
CVL indicates constant voltage low range;
Input State
ON/OFF;
Run Time To display the time the load being ON, reset when shutdown or
switch mode;
Para Set
To set the constant voltage value, unit: V;
Volt Start
To set the start voltage of the load,
0 indicates the function being not enabled;
Volt Limit
To limit the maximum voltage level at the mode
RiseRate To control the voltage rising rate when starting
FallRate
To control the voltage falling rate when stopping
key
Press this dynamic key to return to the main menu;
key
Press this key to switch between CRL and CRH;
key
Press this key to enter the transient operation;
key
Press this key to enter list operation.
1.6.5.4 CP Mode Menu
Description
：
In Constant Power Mode, the load units will maintain a constant power by varying
the current. For more details on CR Mode, please refer to Page 58.