Arjo Maxi Sky 2 PLUS Скачать руководство пользователя страница 50

Страница: 50 / 56

001-31249-EN rev

. 3

Technical Specifications

Technical Data

product information

axi

2 p

lus

Weight, complete (incl. trolley and two ceiling lifts)

51.6 kg (113.5 lb)

Weight, spreader bar

6.6 kg (14.5 lb)

Lifting capacity

Dual Mode 454 kg (1000 lb), Single Mode 272 kg (600 lb)

Strap length

2500 mm (98.4 in)

Lifting speed (Dual Mode) 4.3 cm/s (1.7 in/s) without load

3.4 cm/s (1.3 in/s) at 240 kg (528 lb)
3.0 cm/s (1.2 in/s) at 400 kg (880 lb)
2.9 cm/s (1.1 in/s) at 454 kg (1000 lb)

Maximum stroke (from ceiling)

2300 mm (90.6 in)

Horizontal displacement speeds

N/A, Manually operated

Operating force of control

< 5 N

Push and pull forces at 454 kg (1000 lb)

Horizontal Movement and Rotation

< 60 N

electrical

Duty cycle

Up/Down Motor: Max 10%, 1 minute continuously
Sit/Reclined Motor (Single Mode): Max 10%, 1 minute continuously

Horizontal displacement speeds N/A

Vertical axis motor 24 VDC, 110 watts

Rating 24 VDC, 15 A max

Noise level for either raising or lowering, with or without load 58.2 dBA with no load, 65.3 dBA at 454 kg (1000 lb)

Medical equipment Type BF protection against electrical shock in accordance with IEC 60601-1

WARNING:

Portable RF communications equipment (including peripherals such as antenna cables and external antennas)

should be used no closer than 30 cm to any part of the Maxi Sky 2 Plus, including cables specified by the manufacturer.

Otherwise, performance degradation of this equipment could result. See the "Electromagnetic Compliance" section for more

details.

Battery type 12 V, 5 Ah, sealed rechargeable valve regulated lead acid battery

Battery capacity

Provides up to 110 transfers with a load of 200 kg (440 lb), up to 50 transfers with a

load of 400 kg (880 lb) and up to 34 transfers with a load of 454 kg (1000 lb)

Degree of protection - hand control IPX7

Degree of protection - Maxi Sky 2 Plus IP24

Ceiling lift - protection class - shock prevention Internally powered equipment

Battery charger input 100-240 VAC, 50-60 Hz, 57 – 70 VA

Battery charger output 28.1 VDC, 1 A max, 28.1 VA

Battery Charger safety protection Class 2, double insulated

operation, transport and storage conditions

Normal Operation

Ambient temperature range: 5°C to 40°C (41°F to 104°F)
Relative humidity range: 15% to 93%
Atmospheric pressure range: 700 hPa to 1060 hPa

Transport / Storage

Ambient temperature range: -40°C to 70°C (-40°F to 158°F)
Relative humidity range: 10% to 93% non-condensing
Atmospheric pressure range: 500 hPa to 1060 hPa

WARNING: This equipment is not suitable in the presence of flammable anesthetic mixtures with air or oxygen, or with nitrous

oxide.

Содержание Maxi Sky 2 PLUS

























































Результаты поиска

Содержание Maxi Sky 2 PLUS

Отзывы:

Arjo Maxi Sky 2 PLUS, Инструкция по эксплуатации, Страница: 50 / 56

Результаты поиска

Содержание Maxi Sky 2 PLUS

Отзывы: