manualshive.com logo in svg

Argus 152, Руководство пользователя

Поделиться
Скачать
Argus 152 Скачать руководство пользователя страница 281

20 Operation on a POTS access

ARGUS 152 

281

20.3 Connection on a POTS Access 

Outgoing Calls

The ARGUS sets up a connection to another terminal. If the terminal at the other end is a 
telephone, the handset integrated in the ARGUS or a headset can be used to hold a 
conversation.

For information on the ARGUS in the 
"POTS telephony" access mode, see 
page 278.

The ARGUS - Main Menu

Simplified overlap signaling using the 

 key: and the ARGUS will immediately 

open the POTS telephony display. Once the call number is entered, the call will be 
setup.

Incoming Call 

The ARGUS signals an incoming call both audibly and on the display.

If the access supports CLIP, the ARGUS 
will display the number of the caller (for 
information on CLIP mode, see page 
279).

<Call>

or  

Setup the connection: 

Enter the number on the keypad. 
Each of the number's digits will be 
dialled individually. The ARGUS will 
display the number dialled. As soon 
as the remote party answers, a voice 
connection will be set up.

<Call 
no.>

The ARGUS will display the last 
number dialled (simplified last 
number redial) or that of the last 
caller.

<R>

Generate a FLASH signal.

Scroll through the speed-dialling 
memory to select a different number 
or enter a new one using the keypad.

<Accept> 

or 

 

Accept call

The call number received will be 
saved in the “Last caller” memory 
location.

Single tests

Clearing the connection

or press the 

 key

Содержание 152

























































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды