7 Operation on a VDSL Access
80
ARGUS 145
PLUS
Use the address.
The new address is only saved temporarily and will not
be available when the ARGUS is switched on again.
VLAN
Use
VLAN:
Specifies whether or not VLAN should be used:
yes or no
Default setting:
No
ID:
Identifier for the VLAN to which the frame belongs.
Every VLAN is assigned a unique number, the VLAN
ID. A device, which belongs to the VLAN with the ID =
1, can communicate with every other device in the
same VLAN, but not with a device in other VLANs (one
with an ID other than 1, i.e. 2).
Range: from 0 to 4095
Default:
0
Priority:
User - Priority Information
One of eight priorities (3 bits) can be assigned to each
frame.
In this manner, it is possible e.g. to give priority to
forwarding voice data (e.g. in the case of VoIP), while
HTTP data will be handled as a lower priority.
Range: 0 to 7
Default:
0
PPP:
PPP (Point- to-Point Protocol) settings
User name
Entry of the user name assigned (by the
network operator).
Use the keypad to enter the user name.
When the right softkey is pressed it
assumes a different meaning and thus
influences the entries made from the
keypad (letters or digits):
