14 Operation on an ISDN Access
ARGUS 145
PLUS
281
14.10 Automatic Performance of Multiple Tests
The ARGUS performs an automatic test series and displays the test results. The required
parameters (e.g. measurement time and error level for the BERT, see page 251) should be
checked before the automatic test series is begun.
Using the Windows software, ARGUS WINplus, the test results can be saved on a
Windows PC. On the PC, WINplus can be used to generate a comprehensive report that
can then be printed, sent by e-mail and/or archived.
The ARGUS automatically performs the following sequence of single tests:
On a S-Bus or U interface access
(ARGUS in TE mode)
-
State
-
Level measuring
-
Service tests
-
BERT in an extended call to oneself
-
Supplementary service test
(Suppl.serv.test)
-
CF Interrogation (Call Diversions)
-
MSN Interrogation
-
X.31 Test
On an S-Bus or U interface leased line
(permanent circuit)
-
State
-
Level measuring
-
Service tests
-
BERT in end-to-end mode (e.g. with a
loopbox on the remote end)
