Argus 145 Plus Скачать руководство пользователя страница 13

Страница: 13 / 361

2 Safety Instructions

ARGUS 145

PLUS

The battery pack may not be connected to, or stored or transported with metallic

objects.

Do not expose the battery pack to high electrostatic forces.

The battery pack may not be used in combination with primary (non-

rechargeable) batteries, nor may it be charged or discharged together with other

rechargeable batteries.

If the battery pack is still not properly charged when the charging time has

elapsed, do not charge it again.

Do not expose the battery pack to excessive pressure.

If the battery pack leaks acid or if it emits an odor, keep it away from open fires.

If the battery pack emits an odor or heats up, becomes discolored or misshapen,

or if there are any other indications of that it has malfunctioned while it is in use or

being charged or while it stored, remove the battery pack from the ARGUS or

charger immediately and do not use it again.

If the battery pack leaks acid, make certain that you do not get this acid in your

eyes or on your skin. In event that you get this acid in your eyes or on your skin,

rinse the affected area immediately with clean water. Do not rub the affected

area. In either case, seek medical care immediately. Otherwise, permanent injury

may result.

The battery pack must be kept out of reach of children.

Please read the manual and corresponding security instructions before using the

battery pack.

If you find that the battery pack emits an odor, or is rusty or appears to be in

anything other perfect condition before you first use it, please contact intec to

determine how to proceed.

Содержание 145 Plus










































































































































































































































































































































































Результаты поиска

Содержание 145 Plus

Отзывы:

Похожие инструкции для 145 Plus

Бренды по названию

Популярные бренды

Argus 145 Plus, Руководство пользователя

Результаты поиска

Содержание 145 Plus

Отзывы:

Похожие инструкции для 145 Plus

Бренды по названию

Популярные бренды