manualshive.com logo in svg

Argus 145 Plus, Руководство пользователя

Поделиться
Скачать
Argus 145 Plus Скачать руководство пользователя страница 164

10 ATM Tests

164

ARGUS 145

 PLUS

The VPI / VCI scan starts automatically.

The ARGUS displays the VPI / VCI 
combination currently being tested and the 
last VPI / VCI combination that was found 
to be active (in the example, 1/36).



After the VPI / VCI scan has been 
concluded, the ARGUS will show the VPI / 
VCI combinations active on the access 
under test.

 






Close the results display




For information on saving the results, see 
IP-Ping. page 180

<DSL>

Display 

the xDSL connection 
parameters, trace data, bit 
distribution, signal to noise 
ratio fore each tone etc. 

<Stat.>

Depending on the access 
mode and protocol, the 
ARGUS will display the 
relevant ATM statistics.

Cancel the test.

<Stat.>

see above

<DSL>

see above

<New>

Starting a new VPI/VCI scan

VPI / VCI Scan

VPI/VCI Scan Results

Save the result?

Continuation on 

next page

Содержание 145 Plus










































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды