Argus 145 Plus Скачать руководство пользователя страница 248

Страница: 248 / 361

14 Operation on an ISDN Access

248

ARGUS 145

PLUS

Call acceptance

If the ARGUS is set to “own MSN/DDI“ and is in TE mode on a P-

MP access, it will only signal those calls which are placed to the

MSN (on a P-P access, the DDI) of the access under test.



If set to “all MSN/DDI”, the ARGUS signals all calls.



Prerequisite:



- the "own" number must be entered in the speed-dialing memory

under “own number” (see “Saving Call Numbers in the Speed-

dialing memory” on page 339)



- the incoming call must have a destination MSN



Default setting:

all MSN/DDI



Any change to this setting will be saved.

Voice coding

There are two options for coding voice data in a B-channel:



A-law

(default)



- µ-law



Any change to this setting will not be saved.

DTMF / Keypad

DTMF or keypad settings



Default setting:

DTMF

Destination

number MSN

Enter a destination number, which the ARGUS will use for MSN

interrogation.



Default setting:

9999

CUG Index

Enter the CUG index that the ARGUS should use when testing

the CUG (Closed User Group) service.



Range: 0 to 32767



Default setting:

148

Keypad

A maximum of three Keypad Infos can be stored.



First use the vertical cursor keys to select one of the three

available memory locations for Keypad Infos.

<Edit>

Select the Keypad Info to be edited. Afterwards,

use the keypad to enter the Keypad Info.

Save Keypad Info

Содержание 145 Plus










































































































































































































































































































































































Результаты поиска

Содержание 145 Plus

Отзывы:

Бренды по названию

Популярные бренды

Argus 145 Plus, Руководство пользователя

Результаты поиска

Содержание 145 Plus

Отзывы:

Бренды по названию

Популярные бренды