12 VoIP Test
206
ARGUS 145
PLUS
Silence
detection
If this is set to “on”, ARGUS will not send speech
packets when there is silence (a break in the speech).
This can, however, lead to problems with the
assignment of ports if there is a NAT router.
Default setting:
off
Jitter buffer
Sets the size of the jitter buffer static or adaptive.
Default setting:
static
Static jitter buffer:
Entry of the size of the static
jitter buffer
Range: 20 to 200 ms
nominal:
60ms
Adaptive jitter buffer:
Entry of the minimum (min)
and maximum (max) sizes
of the jitter buffer and the
initial value (init).
Range: 20 to 600 ms
min:
60ms
init:
60ms
max:
120ms
Codecs
Preparation of a list of voice codecs to be used. If
there are multiple codecs in the list, the priority is
determined by the order in the list.
Switch between softkey sets
<
>
The marked codec will be moved down
one place in the list.
<
>
The marked codec will be moved up one
place in the list.
<Insert>
A display of the still available voice
codecs will open. If a voice codec is
marked with a
in this list (Codec
Selection list), it will be added to the
Codec Priority list (in the active list of
voice codecs)
<Del.>
Delete the marked codec from the list
Accept the codec priorities
