14 Operation on an ISDN Access
282
ARGUS 145
PLUS
The ARGUS - Main menu
The ARGUS saves the result in the first
available memory location. If the memory
is full, you must manually select a memory
location to be overwritten. For each
memory location used, the ARGUS will
display the name assigned to the memory
location (in this example, AMP_1) or the
time and date (if you press
<Date>
).
Empty memory locations are labeled
"empty“. page 330
As names for the memory locations, the
ARGUS will suggest either AMP_1,
AMP_2, AMP_3 etc. or the call number
entered as the "Own number“ in the
speed-dialing memory (see page 339).
Accept the suggested name for the
memory location or enter a new name
(see page 331).
Enter the “Own number”; on accesses
using the DSS1 protocol you must also
enter a “remote number”.
Select a service
(needed for the Suppl.serv.test).
During the test sequence, the ARGUS will
display the single test currently running.
Test reports
Stop
Entering own number
Select service
Start the automatic
test
