manualshive.com logo in svg

Argus 145 Plus, Руководство пользователя

Поделиться
Скачать
Argus 145 Plus Скачать руководство пользователя страница 160

9 Operation on an Ethernet Access

160

ARGUS 145

 PLUS

9.5 Clearing Down the Ethernet Connection

ARGUS – State display










Stop Ethernet test.


<Log>PC>

:

The ARGUS will send the trace file to the 
connected PC, which must be running 
WINplus or WINanalyse. The data will be 
saved in the standard "pcap" format and 
can be decoded with a freeware program 
(e.g. Wireshark). The setting “Data Log” 
must be set to “on” before starting test.




The ARGUS saves the Ethernet 
parameters in the first available memory 
location, which can be assigned any 
name (see page 331).

The name for the memory location is 
entered using the keypad (default: 
AMP_1, AMP_2.... or the call number of 
the access under test if the number has 
been entered into the speed-dialling 
memory (see page 339)).

If the memory is full, you must manually 
select a memory location to be 
overwritten.

Continuation on next page

store the 

result

Содержание 145 Plus










































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды