Aquasafe WSL50 Pro, Инструкция по эксплуатации

Страница: 130 / 193


For best results, rinse vials thoroughly between with deionised water.
Ensure that the outside of the vials are clean, dry and free from
fingerprints. Always handle vials by the lid where possible. For deep
cleaning of vials, immerse in Sodium Hypochlorite solution for 1 hour and
rinse with deionised water.

The tablets should be added direct from the foil avoiding contact with
hands or surfaces.

The sample should have a pH value of between 6.2 and 6.5 after addition
of the reagent.

High Calcium ion content and/or high conductivity can lead to turbidity of
the sample and therefore incorrect measurements – a solution is
available if necessary. Chlorine (High Ca) reagents can be purchased from
your Trace2o distributor and are directly substitutable for Chlorine
reagents.

Interferences can occur from oxidising agents such as Bromine and
Ozone.