Aquasafe WSL50 Pro, Инструкция по эксплуатации

Страница: 13 / 193

2.0 Incubator set-up
The incubator is integrated into the waterproof carry case with a docking station
which incorporates the rechargeable battery pack and power supply for the unit.
An external charger is also supplied which is connected to the port on the rear of
the case.
The power pack is comprised of a 12V 15.6Ah Sealed Non-Spillable Lead acid
battery. The battery pack must be electrically isolated during transport on-board
aircraft. To facilitate this, a switch has been incorporated in the carry case which
isolates the power supply.
Please note when transporting via aircraft the switch must be in the off
position (depressed) and secured such that it cannot become depressed during
transit (covering the recessed plate with rigid card should achieve this).
2.1 Docking Station
The Incubator is mounted on a docking station built into the carry case, which
incorporates the rechargeable battery pack and allows the incubator to be run
from the batteries during transportation. It is also possible to use the incubator
on a bench independent of the dock if desired, as long as it is connected to a 240
V AC outlet via the cables provided.
To remove the incubator from the docking
station, lift the incubator vertically upwards,
ensuring not twist or tilt the incubator as this
could result in damage to the connectors. To
place the incubator back onto the docking
station, centre the incubator left to right on the
docking station with the front edge against the
foam, then push down into position.