Aquasafe WSL50 Pro, Инструкция по эксплуатации

Страница: 100 / 193

The display shows:
Note:
- Perform as described above to measure further
standards.
- The minimum number of measured standards is
2.
- The maximum number of measured standards is
14 (S1 to S14).
If all required standards or the maximum value of
14 standards are measured, press [Store] key.
The display shows:
The instrument goes back to the mode menu
automatically.
Now the concentration is stored in the instrument
and can be recalled by entering its method number
or selecting it from the displayed method list.
TIP: Save all your concentration data in a written form because, in case of power
outage (e.g. changing the battery), all concentration data will lost and must be
entered again.
You might want to use mode 67 to transfer all concentration data to a PC.
User Polynomials
It is possible to enter and store up to 25 User Polynomials.
The programme allows the user to apply a Polynomial up to the 5
th degree:
y = A + Bx + Cx
2
+ Dx
3
+ Ex
4
+ Fx
5
If only a Polynomial of a lower degree is necessary, the other coefficients are
specified as zero (0), e.g. for the 2
nd degree is D, E, F = 0.
The values of the coefficients A, B, C, D, E, F must be entered in an academic
notation with maximal 6 decimal places, e.g. 12,135,673 = 1,213,567E+02
Press [MODE], [Shift] + [6] [5] keys.
Confirm with [ ] key.
The display shows:
<User concentr.>
S2 accepted
S3: + ______
│ ESC │ F1 │ Store
<User concentr.>
stored!
<User polynoms.>
choose no.: ______
(800-824)