Applied Precision PTE 2100 Series, Руководство пользователя

Страница: 101 / 114

Portable Test Equipment
User’s Guide
www.appliedp.com
PTE-UGFW56a-EN
101
GEN:RCS:AMP
{<amplitude>}
Setting the modulation amplitude of specific voltage channel(s) stated in %. Parameter is from interval
0.0% < amplitude < 20%.
GEN:RCS:TIM
{< param1>},{< param2>}
Setting the timing of transmission, while param1 parameter defines the type of element:
0
– length of start bit, 1 – length of start pause, 2 – length of data bit, 3 – length of pause between
data bits. Second parameter defines the actual time in ms from interval 1ms < param2 < 30s.
GEN:RCS:TIM?
{<param3>}
Request of the time of given (based on param3 parameter) element (bit/pause). Param3 can be: 0
–
start bit,
1
– start pause, 2 – data bit, 3 – pause between data bits.
GEN:RCS:MESS
{< param1>},{< param2>} [,{< param3>}]
Setting the message of transmission. Parameters of the command are as follows:
param1
– sequence number of the bit (from 1 to N)
param2
– value of the bit marked by param1 (0 or 1)
param3
– optional, number of bits to be set by value defined by param2 starting by param1.
Example: GEN:RCS:MESS 3,1,4 - sets 4 bits starting by 3
rd
bit to 1; '1' - XX1111XXXX...
GEN:RCS:MESS?
Returns the whole message of transmission.
GEN:RCS:MESS:LEN?
Returns the length of the message, maximum is 512 bits.
GEN:RCS:MESS:LEN
{<length>}
Setting length of the message, maximum is 512 bits.