Applied Precision PTE 2100 Series, Руководство пользователя

Страница: 85 / 114

Portable Test Equipment
User’s Guide
www.appliedp.com
PTE-UGFW56a-EN
85
SYST:DOS?
Request for state of Dosage mode. Answer is 0 (=disabled) or 1 (=enabled).
SYST:DOS:ENAB {enable(0|1) }
Setting of state of Dosage mode. Parameter enable can be 0 (=disable) or 1 (=enable).
SYST:DOS:FALL?
Request for Dosage fall method. Answer is 0 (=soft generate) or 1 (=immediate).
SYST:DOS:FALL { method(0|1) }
Setting of Dosage fall method. Parameter can be 0 (=soft generate) or 1 (=immediate).
SYST:DOS:RISe?
Request for Dosage rise method. Answer is 0 (=soft generate) or 1 (=immediate).
SYST:DOS:RIS { method(0|1) }
Setting of Dosage rise method. Parameter can be 0 (=soft generate) or 1 (=immediate).
SYST:DOS:STOP:VOLT { state (0|1) }
Setting of voltage Stopping feature after Dosage completion. Parameter can be 0 (disabled) or 1
(enabled).
SYST:DOS:STOP:VOLT ?
Request for state of “voltage Stopping feature after Dosage completion”. Answer can be 0 (disabled)
or 1 (enabled).
SYST:DOS:STOP:CURR { state (0|1) }
Setting of current Stopping feature after Dosage completion. Parameter can be 0 (disabled) or 1
(enabled).
SYST:DOS:STOP:CURR ?
Request for state of “current Stopping feature after Dosage completion”. Answer can be 0 (disabled)
or 1 (enabled).
Meter Testing Commands
SYST:TST:STOP
Stop meter testing
SYST:TST:STAR
Start meter testing
SYST:TST:STAR?
SYST:TST:STAT?
Both commands (same behavior) return meter testing state: 0 = not running, 1 = running
SYST:TST:STAT:COUN?
Returns number of already measured samples
SYST:TST:RES? { [<count>] }
If parameter is omitted (not used) then returned value is average value from all measured samples
(when measurement is finished then this value is result of measurement).
If parameter used then returned value is value of x-th value when x is defined in parameter.