APPEAR AS
Confidential
232/352
Please note that this must match the input source.
Video Format
Video format of the incoming SDI signal.
Please note that this must match the input source. Options presented here are
dependent on the mode of the port (ie SD/HD)
Signal Loss
Colour Bar : Encoder Produces Colour Bar when input signal is lost.
Black Picture: Encoder Produces Black Picture when input signal is lost.
Use Logo (if available): Display logo configured on service
Signal Loss Timeout
Delay, in ms, before a Signal Loss is triggered after a loss of input SDI signal.
Force Signal Loss
Checkbox to enable a force of signal loss and trigger the ‘Signal Loss’ condition.
Preset
Configuration Presets can be used to help configuring the encoder
optimally for a specific scenario with respect to content and/or bitrate:
These Presets are applied as a templates in the sense that even after a preset
has been chosen; the user can access and alter all the parameters as normal.
9.2.2.2
Analog Encoder (AC-100, AC-200)
Once Composite/RF signals are connected to their respective input ports, the source parameters can be set on
the
Source
tab on the encoder ‘edit’ dialog. Available parameters are:
RF Carrier Freq
RF frequency of input analog signal (RF Encoder only)
Signal Standard
Video format of the incoming Composite signal:
•
PAL B/G/I/D/K
•
PAL M
•
PAL Nc
•
SECAM D/K
•
NTSC M
Please note that this must match the input source.
Audio Gain
Static audio gain applied to the input audio. Range is ±11 dB
Signal Loss
Colour Bar : Encoder Produces Colour Bar when input signal is lost.
Black Picture: Encoder Produces Black Picture when input signal is lost.
Use Logo (if available): Display logo configured on service
