Apollo APOLLO 150 Скачать руководство пользователя

Страница: 83 / 92

// 15. STORAGE

15.1 Bike Storage

Danger of poisoning

Fuel is poisonous and a health hazard.

Avoid skin, eye and clothing contact with fuel.

Immediately consult a doctor if you swallow fuel.

Do not inhale fuel vapors.

In case of skin contact, rinse the affected area with plenty of water.

Rinse the eyes thoroughly with water, and consult a doctor in case of fuel

contact with the eyes.

Change your clothing in case of fuel spills on them.

Keep fuels correctly in a suitable canister, and out of the reach of children.

Before storing the motorcycle, check all parts for function and wear. If service, repairs, or replacements

are necessary, you should do this during the storage period (less workshop overload). In this way, you

can avoid long workshop waiting times at the start of the new season.

When refueling for the last time before taking the motorcycle out of service, add fuel additive.

• Refuel. ( .40)

• Clean the motorcycle. ( .82)

• Change the engine oil and oil filter and clean the oil screens.( .78)

• Check the tire air pressure. ( .57)

• Remove the battery. ( .81)

• Recharge the battery.

Guideline

Storage temperature of battery without direct sunshine 0… 35 °C (32… 95 °F)

• Store the vehicle in a dry location that is not subject to large fluctuations in temperature.

Apollo recommends jacking up the motorcycle.

• Raise the motorcycle with a lift stand.

• Cover the vehicle with a tarp or similar cover that is permeable to air.

Avoid running the engine for a short time only. Since the engine cannot warm up properly, the water va-

por produced during combustion condenses and causes valves and the exhaust system to rust.

If you plan to garage the motorcycle for a longer period, perform the following steps or have

them performed.

Do not use non-porous materials since they prevent humidity from escaping, thus causing

corrosion.

Содержание APOLLO 150




























































































Результаты поиска

Содержание APOLLO 150

Отзывы:

Похожие инструкции для APOLLO 150

Бренды по названию

Популярные бренды

Apollo APOLLO 150, Руководство пользователя

Результаты поиска

Содержание APOLLO 150

Отзывы:

Похожие инструкции для APOLLO 150

Бренды по названию

Популярные бренды