Apollo APOLLO 150 Скачать руководство пользователя

Страница: 7 / 92

Important information about the manual

Particularly important information is distinguished in this manual by the following notations:

The product and specifications are subject to change without notice.

This is the safety alert symbol. It is used to alert you to potential

personal injury hazards. Obey all safety messages that follow this

symbol to avoid possible injury or death.

A WARNING indicates a hazardous situation which, if not avoided,

could result in death or serious injury.

A WARNING indicates a hazardous situation which, if not avoided,

could result in death or serious injury.

Indicates a danger to the environment.

All work marked with this symbol requires specialist knowledge

and technical understanding. In the interest of the safety of your

child, have these jobs performed in an authorized Apollo workshop.

There, your motorcycle will be optimally cared for by specially

trained experts using the specialist tools required.

Indicates a page reference (more information is provided on the

specified page).

Indicates information with more details or tips.

Indicates the result of a testing step.

et/ou

Содержание APOLLO 150




























































































Результаты поиска

Содержание APOLLO 150

Отзывы:

Похожие инструкции для APOLLO 150

Бренды по названию

Популярные бренды

Apollo APOLLO 150, Руководство пользователя

Результаты поиска

Содержание APOLLO 150

Отзывы:

Похожие инструкции для APOLLO 150

Бренды по названию

Популярные бренды