Apollo APOLLO 150 Скачать руководство пользователя

Страница: 51 / 92

Environmental hazard

Hazardous substances cause environmental damage.

• Dispose of oils, grease, filters, fuel, cleaning agents, brake fluid, etc., correctly and in com-

pliance with the applicable regulations

Never use DOT 5 brake fluid. It is silicone-based and purple in color. Oil seals and brake lines

are not designed for DOT 5 brake fluid.

Clean up overflowed or spilled brake fluid immediately with water.

Avoid contact between brake fluid and painted parts. Brake fluid attacks paint.

Only use clean brake fluid from a sealed container.

Preparatory work

• Check the front brake linings. ( .52)

Main work

• Move the brake fluid reservoir to a horizontal position.

• Remove screws 3 .

• Remove cover 1 with membrane 2 .
Add brake fluid to level A.

Guideline

Level A (brake fluid level below reservoir rim)

Brake fluid DOT 4 / DOT 5.1

Position cover 1 with membrane 2. Mount and tighten screws 3.

Содержание APOLLO 150




























































































Результаты поиска

Содержание APOLLO 150

Отзывы:

Похожие инструкции для APOLLO 150

Бренды по названию

Популярные бренды

Apollo APOLLO 150, Руководство пользователя

Результаты поиска

Содержание APOLLO 150

Отзывы:

Похожие инструкции для APOLLO 150

Бренды по названию

Популярные бренды