Apollo APOLLO 150 Скачать руководство пользователя

Страница: 36 / 92

// 6. RIDING INSTRUCTIONS

6.1 Checks and maintenance work when preparing for use

Inspect your vehicle each time you use it to make sure the vehicle is in safe operating condition. Always

follow the inspection and maintenance procedures and schedules described in the Owner’s Manual.

Fuel

• Check fuel level in fuel tank. ( .29)

• Refuel if necessary.

• Check fuel line for leakage.

• Check fuel tank breather hose for obstructions, cracks or damage, and check hose

connection.

Engine oil

• Check oil level in oil tank. ( .78)

• If necessary, add recommended oil to specified level.

• Check vehicle for oil leakage.

Brakes

• Check the brake fluid level of the front brake.( .49)

• Check the rear brake fluid level. ( .49)

• Check the front brake linings. ( .52)

• Check the rear brake linings. ( .52)

• Check that the brake system is functioning properly.

Chain

• Check for chain dirt accumulation. ( .69)

• Check the chain, rear sprocket, engine sprocket, and chain guide. ( .71)

• Check the chain tension. ( .70)

Wheels

• Check the tire condition. ( .56)

• Check the tire air pressure. ( .57)

• Check the spoke tension. ( .57)

Air filter

• Check the air filter. ( .68)

Controls

• Check the settings of all controls and ensure that they can be operated smoothly.

Screws

• Check all screws, nuts and hose clamps regularly for tightness.

Before using this vehicle, check the following points:

Failure to inspect or maintain the vehicle properly increases the possibility of an accident or

equipment damage. Do not operate the vehicle if you find any problem. If a problem cannot

be corrected by the procedures provided in this manual, have the vehicle inspected by a

APOLLO dealer.

6.2 Starting

Always carry out these checks before each departure to ensure that the vehicle can be driven safely.

Always follow the inspection and maintenance procedures and intervals in this owner’s manual.

Always make sure there is sufficient ventilation when running the engine.

Use an effective exhaust extraction system when starting or running the engine in

an enclosed space.

Danger of poisoning

Exhaust gases are toxic and inhaling them may result in unconsciousness and death.

Содержание APOLLO 150




























































































Результаты поиска

Содержание APOLLO 150

Отзывы:

Похожие инструкции для APOLLO 150

Бренды по названию

Популярные бренды

Apollo APOLLO 150, Руководство пользователя

Результаты поиска

Содержание APOLLO 150

Отзывы:

Похожие инструкции для APOLLO 150

Бренды по названию

Популярные бренды