Apollo APOLLO 150 Скачать руководство пользователя

Страница: 30 / 92

4.10 Fuel tap

4.11 Choke

4.12 Kick starter

Fuel tap 1 is on the left of the fuel tank.

Possible states

The fuel cock supplies fuel from the tank to the carbu-

retor while filtering it also.

The fuel cock has two positions:

// Close : Arrow mark pointing to the down

With the lever in this position, fuel will not flow. Always

return the lever to this position when the engine is not

running.

// Open : Arrow mark pointing to the left

With the lever in this position, fuel flows to the carbure-

tor. Normal riding is done with the lever in this position.

Choke 1 is fitted on the left side of the carburetor.

Activating the choke function frees a drill hole in the

carburetor through which the engine can draw extra

fuel. This results in a richer fuel-air mixture, which is

needed for a cold start.

Kick starter 1 is fitted on the right side of the engine.

The kick starter can be swiveled.

Possible states:

// Choke function activated

Choke knob is in drawn position. The O-ring is visible

// Choke function deactivated

Choke knob is in drepressed position. The O-ring is not

visible

If the engine is warm, the choke function must

be deactivated.

Before riding, swing the kick starter inwards

towards the engine.

Содержание APOLLO 150




























































































Результаты поиска

Содержание APOLLO 150

Отзывы:

Похожие инструкции для APOLLO 150

Бренды по названию

Популярные бренды

Apollo APOLLO 150, Руководство пользователя

Результаты поиска

Содержание APOLLO 150

Отзывы:

Похожие инструкции для APOLLO 150

Бренды по названию

Популярные бренды