Apollo APOLLO 150 Скачать руководство пользователя

Страница: 70 / 92

If the chain is too loose, the chain may fall off the engine sprocket or the rear sprocket. As a result, the

rear wheel locks or the engine will be damaged.

• Check the chain tension regularly.

• Set the chain tension in accordance with the specification.

11.24 Checking the chain tension

11.25 Adjusting the chain tension

Danger of accidents

Incorrect chain tension damages components and results in accidents.

Danger of accidents

Incorrect chain tension damages components and results in accidents.

If the chain is tensioned too much, the chain, engine sprocket, rear sprocket, transmission and rear

wheel bearings wear more quickly. Some components may break if overloaded.

If the chain is tensioned too much, the chain, engine sprocket, rear sprocket, transmission and rear

wheel bearings wear more quickly. Some components may break if overloaded.

If the chain is too loose, the chain may fall off the engine sprocket or the rear sprocket. As a result, the

rear wheel locks or the engine will be damaged.

• Check the chain tension regularly.

• Set the chain tension in accordance with the specification.

Preparatory work

• Raise the motorcycle with a lift stand.

Main work

– Press the chain upward at the end of the chain sliding piece

and determine chain tension A.

Guideline

Chain Tension 15...25mm (0,6..0,9 in)

Chain wear is not always even, so you should repeat this

measurement at different chain positions.

Guideline

Chain tension 15...25mm (0,6..0,9 in)

If the chain tension does not meet the specification:

• Adjust the chain tension. ( .70)

The upper part of the chain 1 must be taut.

Содержание APOLLO 150




























































































Результаты поиска

Содержание APOLLO 150

Отзывы:

Похожие инструкции для APOLLO 150

Бренды по названию

Популярные бренды

Apollo APOLLO 150, Руководство пользователя

Результаты поиска

Содержание APOLLO 150

Отзывы:

Похожие инструкции для APOLLO 150

Бренды по названию

Популярные бренды