LP0250
R&G Racing
Unit 1, Shelley’s Lane, East Worldham, Alton, Hampshire, GU34 3AQ
Tel: +44 (0)1420 89007 Fax: +44 (0)1420 87301
Email:
1
Page | 1
FITTING INSTRUCTIONS FOR LP0250BK LICENCE PLATE BRACKET
HUSQVARNA VITPILEN/SVARTPILEN 401 2018
(FOR USE WITH STANDARD AND R&G MINI INDICATORS (8mm))
THIS KIT CONTAINS THE ITEMS PICTURED AND LABELLED BELOW.
DO NOT PROCEED UNTIL YOU ARE SURE ALL PARTS ARE PRESENT.
Please note that the way the kit is packed does not necessarily represent the way of
mounting to the bike
T
HE PARTS SHOWN MAY BE REPRESENTATIVE ONLY
(
FOR CLARITY OF INSTRUCTIONS ONLY
)
Digital copies of these instructions are available to download from
GENERAL TORQUE SETTINGS
M4 BOLT = 8Nm
M5 BOLT = 12Nm
M6 BOLT = 15Nm
M8 BOLT = 20Nm
M10 BOLT = 40Nm
Please note that in cases where kits are packed with rubber washers holding the components
onto the bolt –
the rubber washers should be thrown away
!
TOOLS REQUIRED
•
Set of metric Allen keys.
•
Socket set to include 8, 10, 12 and 13mm A/F socket and wrench.
•
Torx bits to include T20, 25, 30, 40 and 45.
•
Set of metric spanners to include 9, 12 and 13mm A/F sizes.
•
Phillips driver.
•
Electrical pliers/crimps.
•
Small amount of super glue.
