Apollo APOLLO 150 Скачать руководство пользователя

Страница: 48 / 92

The dust-protection bellows 1 are to remove dust and coarse dirt particles from the fork tube. However,

after some time, dirt may also get in behind the dust-protection bellows. If this dirt is not removed, the

oil sealing rings located behind it may start to leak.

Use a screwdriver to lift the dust-protection bellows out of the outer tubes and slide them downward.

Clean dust-protection bellows, outer tubes, and fork tubes thoroughly, and oil them thoroughly with oil-

spray or engine oil. Then, push dust-protection bellows into the outer tubes by hand.

The handlebar position can be readjusted (ELITE/ELITE S only). Thus, you can put the handlebar in the

position that is the most convenient for you. The upper triple clamp includes bores arranged. Accor-

dingly, you can mount the handlebar in different positions.

For this purpose, remove screws 1 of the handlebar clamps. Mount handlebar and handlebar clamps,

and tighten screws 1 to 22 Nm. The gap between the handlebar support and handlebar clamps should

be the same size in the front and in the rear.

8.7 Cleaning the dust sleeves of the telescopic fork

8.8 How to change the handlebar position

No oil may reach the front tire or the brake disks since this would consider-ably reduce the

tire’s road grip and the braking effect of the front brake.

The screws must be secured with a thread locker (Loctite).

Содержание APOLLO 150




























































































Результаты поиска

Содержание APOLLO 150

Отзывы:

Похожие инструкции для APOLLO 150

Бренды по названию

Популярные бренды

Apollo APOLLO 150, Руководство пользователя

Результаты поиска

Содержание APOLLO 150

Отзывы:

Похожие инструкции для APOLLO 150

Бренды по названию

Популярные бренды