Apollo APOLLO 150, Руководство пользователя

Страница: 56 / 92

56
10.4 Installing the rear wheel
10.5 Checking the tire condition
Danger of accidents
Oil or grease on the brake discs reduces the braking effect.
• Always keep the brake discs free of oil and grease.
• Clean the brake discs with brake cleaner when necessary.
Main work
Check the wheel bearing for damage and wear.
If the wheel bearing is damaged or worn:
• Change the rear wheel bearing.
• Insert the spacers.
• Position the rear wheel and insert wheel spindle 3.
• Position chain adjuster 2. Mount nut 1, but do not tighten it
yet.
• Make sure that chain adjusters 2 are fitted correctly on ad-
justing screws 4.
• Check the chain tension. ( p. 57)
• Tighten nut 1.
Guideline
Nut, rear wheel spindle M14 121Nm (89,2 lbf ft)
• Operate the foot brake lever repeatedly until the brake li-
nings are in contact with the brake disc and there is a pres-
sure point.
The type, condition, and air pressure of the tires all have a major impact on the handling of the motorcy-
cle. The tires mounted on the front and rear wheels must have a similar profile.
Worn tires have a negative effect on handling characteristics, especially on wet surfaces.
• Check the front and rear tires for cuts, run-in objects, and other damage.
If the tires have cuts, run-in objects, or other damage:
• Change the tires.
• Check the tread depth.
Only mount tires approved and/or recommended by Apollo.
Other tires could have a negative effect on handling characteristics.
Adhere to the legally required minimum tread depth.
Minimum tread depth
≥
2 mm (
≥
0.08 in)
If the tread depth is less than the minimum tread depth:
• Change the tires.
• Check the tire age.
3
2
2
1
4