AMX AXD-MCA, Инструкция по эксплуатации

Страница: 139 / 198

132 AXCESS Programming Color Active-Matrix LCD Mini-Touch Panels
Border Styles and Programming Numbers
Figure 205 lists border styles and their numbers you can use to program borders on
buttons, sliders, and gauges.
Border styles and programming numbers
No. Border styles No. Border styles
0 No border 11 Double shadow
1 No border special 20 3-dimensional rectangle 1
2 Single line 21 3-dimensional rectangle 2
3 Double line 22 3-dimensional round 1
4 Triple line 23 3-dimensional round 2
5 Single rounded 24 3-dimensional neon 1
6 Double rounded 25 3-dimensional neon 2
7 Single raised 26 3-dimensional neon blue
8 Double raised 27 3-dimensional neon green
9 Triple raised 40 Single diamond
10 Double-line two single 41 Double diamond
Shorthand Send_Commands
Figure 206 lists the shorthand Send_Commands you can use with touch panels. The
shorthand command data is 1-byte, non-ASCII format except for pages, passwords,
text, and bitmap names.
Shorthand Send_Commands
Command Description
"'@CBF',<variable text
address>,<color_
number>"
Set the OFF feedback border color to the specified color.
<variable text address> = 1 - 255
<color_number> = see Figure 203
Example:
SEND_COMMAND TP,"'@CBF',1,0"
Sets the OFF feedback border color to Red for the variable text
button 1.
Figure 205
Border styles and program-
ming numbers
Figure 206
Shorthand Send_Commands
Note
Shorthand commands were
created by AMX designers to
streamline receiving, process-
ing, and transmitting Central
Controller data. The short-
hand commands operate con-
trol equipment just like the
standard Send_Commands
still used in a wide variety of
AMX products, but they are
simply smaller byte-for-byte,
and are processed more effi-
ciently.