manualshive.com logo in svg

AMX AXD-MCA, Инструкция по эксплуатации

Поделиться
Скачать
AMX AXD-MCA Скачать руководство пользователя страница 118

110

Touch Panel Program Reference

Color Active-Matrix LCD Mini-Touch Panels

gram. When a control level is set on the horizontal bargraph, control data is
sent to the Central Controller to control an external device.

 

BARGRAPH CENTERING     Sets the bargraph as a vertical controller with
a default control level. Levels must be defined in the AXCESS software
program. When a control level change is sent to the Central Controller, the
external device changes accordingly until the control data input stops. Then
the control level on the horizontal bargraph returns to the default position
and the external device returns to a default control position.

 

SLIDER DISPLAY      Sets the slider as a horizontal status indicator for ex-
ternal devices. Levels must be defined in the AXCESS software program.

 

SLIDER ACTIVE     Sets the slider as a controller for external devices. Con-
trol levels must be defined in the AXCESS software program. When a con-
trol level is set on the horizontal bargraph, data is sent to the Central Con-
troller to control an external device.

 

SLIDER CENTERING     Sets the slider as a horizontal controller with a de-
fault control level. Control levels must be defined in the AXCESS software
program. When a control level change is sent to the Central Controller, the
external device changes accordingly until the control data input stops. Then
the control level on the bargraph returns to the default position and the ex-
ternal device returns to its default control position.

 

BATTERY VOLTAGE     Sets the button to show the voltage level of the bat-
tery (if equipped).

•

 

STRING

         Opens the keyboard where you enter the data string to be sent

to the Central Controller via AXlink, RS-232, or RF communications. The
data string appears in the STRING button. Press ABORT to close the menu.

Properties Page — External Buttons

The following paragraphs describe how to configure the External buttons in the But-
ton Properties page. Certain features on the BUTTON menu are not applicable to ex-
ternal pushbuttons because they are not created by the firmware but rather are a part
of the panel hardware itself. The only features that are applicable from the BUTTON
menu are the TEXT/IMAGE and PROPERTIES buttons. The steps used to configure
the external pushbutton’s text/image is identical to those for the buttons created us-
ing the panel’s firmware. Refer to the Text/image subsection for detailed information
about associating text with a button.

Содержание AXD-MCA







































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды