Color Active-Matrix LCD Mini-Touch Panels
Upgrading from G2 to G3 Firmware
153
Configuring your communications
Before beginning, configure the TPDesign program to communicate with the touch
panel via the Central Controller.
1.
Click Configure from the Options menu (Figure 221). The Configure Communi-
cations dialog box (Figure 222) appears.
2.
Choose Comm Port, click the Communication Port connected to the PROGRAM
port on the Central Controller.
3.
Under the Baud Rate, click the communication speed (default is 38.4 KB).
4.
The values set under the Data Bits, Parity, and Stop Bits are also defaulted to 8,
None, and 1, respectively.
Figure 220
TPDesign Main screen
Figure 221
Options drop-down menu
Note
When connecting to the
panel, the baud rate should
be matched within the Pro-
tected Setup page’s BAUD
selection button.
Содержание AXD-MCA
Страница 30: ...22 Installing Mini Touch Panels Color Active Matrix LCD Mini Touch Panels ...
Страница 68: ...60 Designing Touch Panel Pages Color Active Matrix LCD Mini Touch Panels ...
Страница 130: ...122 Touch Panel Program Reference Color Active Matrix LCD Mini Touch Panels ...
Страница 180: ...172 Memory Upgrade Color Active Matrix LCD Mini Touch Panels ...