manualshive.com logo in svg

AMX AXD-MCA, Инструкция по эксплуатации

Поделиться
Скачать
AMX AXD-MCA Скачать руководство пользователя страница 18

10

Installing Mini-Touch Panels

Color Active-Matrix LCD Mini-Touch Panels

1.

 

For UniMount–style (AXU) touch panels, cut out the surface using the dimen-
sions shown in Figure 10. For Decor-style (AXD) touch panels, cut out the surface
using the dimensions shown in Figure 11.

2.

 

Carefully insert a flat-blade screwdriver into the release slot on the touch panel’s
bezel and remove the engraved overlay.

3.

 

Lay the touch panel facedown onto a soft cloth and remove the screws from the
low-profile Back Box. Remove the Back Box and discard.

4.

 

Place the BB-MTP into the cutout and mark the threaded insert positions as
shown for the UniMount (Figure 10) or the Decor-style panel (Figure 11).

Figure 10

UniMount (AXU) and) and BB-

MTP cutout dimensions

Note

 

The BB-MTP can also be

mounted to wood or metal

studs using the pre-drilled

stud mounting holes.

Note

 

The touch panel must always

be installed with the release

slot located at the bottom.

Содержание AXD-MCA







































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды