Amtech Axpert-Eazy AMT-011-4, Инструкция по эксплуатации

Страница: 47 / 242

Axpert-Eazy AC Variable Frequency Drive
6-1
6
CHAPTER-6: PARAMETER SETTINGS & FUNCTIONS
MODE-M: Monitor Parameters
The monitor parameters display various information like operating parameters, status of various
signals, software version, fault history etc…
No. Parameter Unit Res. Description
GROUP-1
M101 Output Frequency Hz 0.01 It displays the output frequency. If the AC DRIVE is off, it will display
zero.
M102 Motor Speed rpm 1 It displays the motor speed or shaft rpm.
If
A401 =1, 3, 5, 7: It displays the calculated motor speed or shaft rpm
using line speed setting A105 or D205 and M101 .
If
A401
=2, 4, 6, 8: It displays the actual speed of motor shaft using
encoder.
M103 Output Current Amp 0.1 It will display the output current. If the AC DRIVE is
OFF
, it will display
zero.
M104 Output Current %L 1
The output current is displayed as % of motor rated current
B103
.
M105 Set Frequency Hz* 0.01 The currently selected frequency setting value is displayed.
M106 Frequency Reference
Input
The currently selected frequency setting input point in
A106
or
D204
will
be displayed.
M107 Set Torque % 0.1 The current value of torque setting is displayed in vector control mode.
M108 Torque Reference Input The currently selected torque setting input point in A108 will be displayed
in vector control mode only.
M109 PID Reference 0.1 Displays the value of currently selected
PID
reference in the unit selected
in C614 .
M110 PID Feedback 0.1 Displays the value of currently selected
PID
feedback in the unit selected
in C614 .
M111 FSV Input Voltage V 0.1 Display the analog input voltage at FSV.
M112 FSI Input Current mA 0.1 Display the analog input current at FSI.
M113 VIN Input Voltage V 0.1 Display the analog input voltage at VIN.
M114 IIN Input Current mA 0.1 Display the analog input current at IIN.
M115 Output Current U Amp 0.1 Display the Output current of U phase.
M116 Output Current V Amp 0.1 Display the Output current of V phase.
M117 Output Current W Amp 0.1 Display the Output current of W phase.
GROUP-2
M201 Input Voltage Vry Vac 1 Displays Input Vry Voltage. This may differ from the actual i/p voltage.
M202 Input Voltage Vyb Vac 1 Displays Input Vyb Voltage. This may differ from the actual i/p voltage.
M203 Output Voltage Vac 1 Displays output voltage command. The display may differ from the actual
output voltage. It depends on the power supply voltage. It will display
zero when AC DRIVE is
OFF
.
M204 DC Bus Voltage Vdc 1 Displays the voltage of the
DC
bus in the main circuit.
M205 Output Power
K
W 0.1 Displays the AC DRIVE output power.
M206 Energy Meter
K
WH 0.1 Displays the energy consumed by the system in kWH.
M207 Energy Meter MWH 1 Displays the energy consumed by the system in MWH.
M208 Heat sink Temperature
o
C 1 Actual heat sink temperature is displayed.
M209 Torque Current % 0.1 The torque current value is displayed using the motor rated current as
100% .
M210 Excitation Current % 0.1 The excitation current value is displayed using the motor rated current as
100%.
M211 Heat sink Temperature
o
F 1 Actual heat sink temperature is displayed in degree F.