Ametek OCS 500 M6 Скачать руководство пользователя страница 47

Страница: 47 / 80

AMETEK CTS

OCS 500 N6 series

Manual for Operation

V 5.24

47 / 80

7.1.2.2.

Manual testing

The manual test menu is only in the single phase equipment available.

Manual standard test routine

Damped Osc. 3MHz                     IEC 61000-4-18

<- ->                 O

Level 3

2000V L PE 5000/s

Testtime 0:00:45 h

START

/- L-PE N-PE L+N-PE

Common mode menu

Within this test routine all standard parameters can be changed online during testing. This procedure therefore is
very easy and fast to use.

Example:

- By pushing the cursor

➔

the test level will be increased/decreased to the next standard level.

- By turning the INC knob (

) the test level can be continuously adjusted.

- Pressing the function keys the related function will be immediately activated.

- The displayed time will be resettled to zero after every new setting.

All functions can be operated during the running test.

Содержание OCS 500 M6

















































































Результаты поиска

Содержание OCS 500 M6

Отзывы:

Ametek OCS 500 M6, Руководство по эксплуатации, Страница: 47 / 80

Результаты поиска

Содержание OCS 500 M6

Отзывы: