Ametek OCS 500 M6, Руководство по эксплуатации, Страница: 42 / 80

AMETEK CTS OCS 500 N6 series
Manual for Operation V 5.24 42 / 80
6.3.3.1. Level test
A selected level will step through all couplings in the selected Mode. The following parameters are used:
Defined per
standard Voltage selected level voltage
Repetition f 40/s (100 kHz) 400/s (1 MHz)
Polarity each coupling positive and negative
Coupling Differential Mode L-N
Common Mode L-PE, N-PE, L+N-PE
Variable
parameters
Burst Time td 0.1s
– 99.9s
Repetition tr 0.0s
– 99.9s
Page 5 (standard test in stop mode) (Running standard test)
Damped Oscillatory IEC 61000-4-18 Level 3 Damped Oscillatory IEC 61000-4-18 Level 3
V = 2000V Rep = 400/s V = 2000V Rep = 400/s
Td = 2s Td = 2s
Tr = 2s
+ 2000 V
Tr = 2s
L L Testtime
current coupling

0:00:21
START CHANGE
STOP Step complete test time

0:02:21
F1 F2 F3 F4 F5 F6 F7 F1 F2 F3 F4 F5 F6 F7
- The Test time shows the elapsed time per actual test level as
well as the complete time of all triggered test levels within the
running test sequence.
- Pushing the function key F2 STEP will bring you into the next
iteration sequence.