Ametek Drexelbrook Impulse GW Series, Инструкция по установке и эксплуатации

Страница: 67 / 99

Configuration and Calibration
61
4.5 Configuration Menu (Continued)
Fct. 3.01 Maximum
Points
(MAX PNT)
The strapping table is capable of
up to 21 points, that are set by
default from 0% to 100% in 5%
increments with the relationship
between points being linear. The
number of points required is de-
termined by the relationship of the
desired output to level and desired
accuracy. In general more points
will more accurately define the
relationship.
Enter the number of break points
for this selection by editing this
menu item.
2…21
Default = 21
Fct. 3.02 Index Num-
ber
INDEX)
The user enter the index of the
strapping table ( from 1 - 21) that
they wish to view or edit in Fct
3.03 and 3.04
1..21
Default = 21
Fct. 3.03 Level In
Point
(IN PT)
Defines the input level for the cur-
rently selected Index number in
current level units
User editable
value
Fct. 3.04 Volume Out
Point
(OUT PT)
Defines the output volume for the
currently selected Index number in
current volume units
User editable
value
Fct. 4.00 Display
(DISPLAY)
Select which displays will be vis-
ible during operation.
Fct. 4.01 Toggle?
(TOGGLE)
Select if the display will automati-
cally cycle through the enabled
display options.
“YES”, unit will scroll every 10
seconds
“NO”, unit can be manually ad-
vanced through all enabled selec-
tions using up/down arrow keys
YES / NO
Fct. 4.02 Display
Level?
(LEVEL)
Select if the Level will be visible
on the display
ENABLE /
DISABLE