Ametek Drexelbrook Impulse GW Series, Инструкция по установке и эксплуатации

Страница: 35 / 99

Configuration and Calibration
29
3.3 Configuration Menu (Continued)
Fct. 3.00 Strapping
Table
(STRAP)
The strapping table is a look-up
table of level vs. volume, weight
or other customer defined pa-
rameter that modifies the output
signals (analog and digital) based
on the relationship. The table is
either automatically populated
from the selection of a predefined
vessel type or is manually entered
by the user based on known pa-
rameters. This function applies
to volume output only.
Fct. 3.01 Maximum
Points
(MAX
PNT)
The strapping table is capable
of up to 21 points, that are set
by default from 0% to 100% in
5% increments with the relation-
ship between points being linear.
The number of points required
is determined by the relationship
of the desired output to level and
desired accuracy. In general more
points will more accurately define
the relationship.
Enter the number of break points
for this selection by editing this
menu item.
2…21
Default = 21
Fct. 3.02 Index
Number
INDEX)
The user enter the index of the
strapping table ( from 1 - 21) that
they wish to view or edit in Fct
3.03 and 3.04
1..21
Default = 21
Fct. 3.03 Level In
Point
(IN PT)
Defines the input level for the
currently selected Index number
in current level units
User editable
value
Fct. 3.04 Volume
Out Point
(OUT PT)
Defines the output volume for the
currently selected Index number
in current volume units
User editable
value
Fct. 4.00 Display
(DIS-
PLAY)
Select which displays will be vis-
ible during operation.