American Megatrends Super Voyager LPX, Руководство пользователя

Страница: 39 / 200

Super Voyager LPX ISA Motherboard User's Guide
Step 3 Install Memory
The main memory subsystem on the Super Voyager LPX
motherboard has one bank of DRAM on the motherboard and four
32-bit SIMM (Single Inline Memory Module) memory sockets.
If the surface-mounted DRAM bank is used as Bank0 (Pins 1-2 of
both J46 and J47 are shorted together), see the system memory table
on the previous page.
If the DRAM bank is not populated or Pins 2-3 of both J46 and J47
are shorted together, the potential system memory configurations are
shown on page 34.
Each socket can hold one SIMM unit. You can use 256 KB x 36,
512 KB x 36, 1 MB x 36, 2 MB x 36, 4 MB x 36, 8 MB x 36, or 16
MB x 36 SIMMs. The SIMMs can be single-sided or double-sided.
The Super Voyager LPX motherboard uses fast page mode SIMMs
operating at 70 ns (RAS access time).
Reporting Memory
The system memory is reported by AMIBIOS as it boots and again
when the AMIBIOS System Configuration Screen is displayed just
before DOS is booted.
The memory displayed by WinBIOS on the System Configuration
Screen is 384 KB less than the total memory installed.