American Megatrends Super Voyager LPX, Руководство пользователя

Страница: 34 / 200

Super Voyager LPX ISA Motherboard User's Guide
Step 2 Set Switch and Jumper Options,
Continued
J19 CMOS RAM Drain
J19 is a three-pin single-inline berg. In normal operation, pins
1-2 are shorted. Short pins 2-3 to drain CMOS RAM.
Warning
The computer power must be turned off before
moving the J19 shorting bridge to Pins 2-3.
Make sure you use proper procedures to avoid
electrostatic discharge.
The shorting bridge must be installed on Pins 1-2
of J19 before the computer power is turned on
again.
In most computer, if you forget the system password, you must
remove the battery for at least 20 minutes to erase the
password. J19 provides a quicker method. Turn power off.
Then short J19 pins 2-3 together for several seconds to
quickly drain CMOS RAM.
You must then place the shorting bridge on Pins 1-2 of J19
before turning power on. Then you must run WinBIOS
Setup to reconfigure the computer, since no system
configuration data will now be stored in CMOS RAM.