American Megatrends Super Voyager LPX, Руководство пользователя

Страница: 47 / 200

Super Voyager LPX ISA Motherboard User's Guide
Step 5 Install the Motherboard
The motherboard mounting hole pattern is the same as the mounting
hole pattern on the standard Western Digital LPX motherboard.
Standoffs and mounting screws are not supplied with the
motherboard. The chassis manufacturer should supply these parts.
Step Action
1 Place the chassis on an anti-static mat. Connect the chassis to ground to
avoid static damage during installation. Connect an alligator clip with a
wire lead to any unpainted part of the chassis. Ground the other end of the
lead at the same point as the mat and the wristband.
2 Rotate the chassis so that the front is to the right, and the rear is to the left.
The side facing you is where the motherboard is mounted. The power
supply is mounted at the far end of the chassis.
3 Hold the motherboard, component-side up, with the edge with the SIMM
sockets toward you and the edge with the power supply connector away
from you. The keyboard, mouse, and video connectors should be to the
left.
4 Carefully slide the motherboard into the chassis. Make certain that the
edge connectors fit the ports in the rear of the chassis. The motherboard
should rest level with the chassis.
5 Place the mounting screws in the holes provided for them and tighten
them. If necessary, shift the motherboard slightly to align the mounting
holes on the motherboard with the holes on the chassis. Refer to the
graphic on pag
e 16.
Warning
If using metallic screws, make sure that you use
them only in the plated mounting holes.
If using metallic screws, make sure that the head
of the screw fits completely inside the plated
mounting holes.
See the graphic on the following page.