American Megatrends Super Voyager LPX, Руководство пользователя

Страница: 95 / 200

Super Voyager LPX ISA Motherboard User's Guide
Installing ADI VGA Drivers,
Continued
Tips , cont'd
Sometimes, when using the Big Picture, the digitizer cursor sticks to
the edge of the bird's-eye. This is normal and is the result of the
digitizer puck responding to the entire screen area while the Big
Picture only occupies a small portion of the screen. Because of
screen resolution difference, the digitizer puck must cover more
drawing area to move to the same location when the screen cursor
enters the Big Picture area.
Since TurboDLD Classic is totally transparent to users with respect
to using normal AutoCAD commands to redraw, pan, and zoom,
you still have to suffer from some of AutoCAD nuances. One of
these nuances is that Zoom All and Zoom Extends both force a
Regen because AutoCAD does not track the boundaries necessary to
avoid Regens. Regens are time-consuming and do not use display
list processing. Use the View command instead.
When you first load an image and see the whole drawing on the
screen at once, type View Save All and press <Enter> to save the
display position in the All view. After editing, type View Restore
All and press <Enter>. The full drawing is restored at display list
speed with no regen.
If you zoom in too far or pan over too far you may inadvertently
cause a Regen. Type REGENAUTO Off and press <Enter> at the
AutoCAD command prompt and automatic Regens are disabled.
The REGENAUTO setting is also saved as part of your drawing
file, so you only need to execute it once per drawing. You may even
want to set REGENAUTO off in your ACAD.DWG drawing
template.