American Megatrends Super Voyager LPX, Руководство пользователя

Страница: 147 / 200

AMIBIOS Displayed Error Messages,
Continued
Super Voyager LPX ISA Motherboard User's Guide
Error Message Explanation
screen instructions.
Display Switch Not
Proper Some systems require video switch on the motherboard be
set to either color or monochrome. Turn the system off, set
the switch properly, then power on.
DMA Error Error in the DMA controller on the motherboard.
DMA #1 Error Error in the first DMA channel on the motherboard.
DMA #2 Error Error in the second DMA channel on the motherboard.
FDD Controller
Failure AMIBIOS cannot communicate with the floppy disk drive
controller. Check all appropriate connections after the
system is powered down.
HDD Controller
Failure AMIBIOS cannot communicate with the hard disk drive
controller. Check all appropriate connections after the
system is powered down.
INTR #1 Error Interrupt channel 1 failed the POST diagnostic test.
INTR #2 Error Interrupt channel 2 failed the POST diagnostic test.
Invalid Boot Diskette AMIBIOS can read the diskette in floppy drive A:, but it
cannot boot the system with it. Use another boot diskette
and follow the screen instructions.
Keyboard Is
Locked...Unlock It The keyboard lock on the system is engaged. The system
must be unlocked to continue the boot process.
Keyboard Error Timing problem with the keyboard. Make sure a keyboard
controller AMIBIOS is installed. Set the
Keyboard
option
in Standard Setup to Not Installed to skip the keyboard
POST routines.
KB/Interface Error Error in the keyboard connector on the motherboard.
No ROM BASIC Cannot find a proper bootable sector on either diskette
drive A: or hard disk drive C:. Use a bootable disk.
Off Board Parity Error Parity error in offboard memory. The format is:
OFF BOARD PARITY ERROR ADDR (HEX) = (XXXX)
XXXX is the hex address where the error occurred. Run
AMIDiag to find and correct memory problems.
Onboard Parity Error Parity error in motherboard memory. The format is:
Onboard PARITY ERROR ADDR (HEX) = (XXXX)
XXXX is the hex address where the error occurred. Run
AMIDiag to find and correct memory problems.
Parity Error ???? Parity error in system memory at an unknown address.
Run AMIDiag to find and correct memory problems.